1.8
Getting started
Installing the printing supplies
Your fax prints incoming faxes and copies with a reliable 400 dpi print engine. Your
fax requires two types of printing supplies (sometimes also called consumables):
• The drum cartridge — It yields 20,000 normal letter-sized printouts (see
“Specifications,” page
AI
.1). By “normal,” we’re referring to the amount of text
and/or graphics on each page. This is based on an industry-standard test docu-
ment.
• The toner cartridge — It yields 10,000 “normal”, letter-sized printouts (see
“Specifications,” page
AI
.1).
To install these supplies:
1
Pull up the top cover release and open
the top cover.
2
Pull up the printer
cover release and
open the printer
cover.
3
Unpack a new toner cartridge from its
carton. Then, holding the toner car-
tridge with both hands, slowly shake it
as shown (note the arrows).
Note: Do not throw the toner cartridge
into the fire; this will avoid any
possibility of ignition and/or
injury.
4
Place the new toner cartridge on a flat, clean surface.
5
Unpack the drum cartridge from its carton.
Note: Shield the drum cartridge from light, especially strong light. Later, if
you have to remove the cartridge from the fax, immediately wrap it in
a thick cloth to protect it from light.
6
Set the drum cartridge on the toner car-
tridge, making sure that the drum
cartridge’s two pins fit in the slits inside
the toner cartridge frame.
Note: Do not touch the developing
roller.
7
Grip toner cartridge as shown, to avoid
pinching your fingers between the toner
cartridge and the printer frame. Keep
the drum slot free of dust and other for-
eign materials.
8
Gently install the toner car-
tridge in the printer, making
sure the toner cartridge's four
pins fit in the slits inside the
printer frame.
