A SERVICE OF

logo

ANALYTICAL METHODS FOR TEXTILE COMPOSITES
4-22
4.19 B. N. Cox, Failure Models for Textile Composites, NASA Contractor Report 4686,
Rockwell Science Center, Thousand Oaks, California, 1995.
4.20 J. M. Hedgepeth and P. Van Dyke, "Local Stress Concentrations in Imperfect
Filamentary Composite Materials," J. Comp. Mater. 1, 294-309 (1967).
4.21 J. Xu, B. N. Cox, M. A. McGlockton, and W. C. Carter, "A Binary Model of Textile
Composites - II. The Elastic Regime," Acta Metall. Mater. 43, 3511-24 (1995).
4.22 B. N. Cox, M. S. Dadkhah, and W. L. Morris, "On the Tensile Failure of 3D Woven
Composites," Composites, in press.
4.23 A. Fujita, Z. Maekawa, H. Hamada, and A. Yokoyama, "Mechanical Behavior and
Fracture Mechanism in Flat Braided Composites. Part 1: Braided Flat Bar," J. Reinf.
Plastics Comp. 11, 600-17 (1992).
4.24 N. K. Naik, P. S. Shembekar, and M. V. Hosur, "Failure Behaviour of Woven Fabric
Composites," J. Comp. Tech. and Res. 13[1], 107-16 (1991).
4.25 A.-M. Harte and N. A. Fleck, private communication, 1995.
4.26 S. P. Timoshenko and J. N. Goodier, Theory of Elasticity (McGraw-Hill, New York,
1951).
4.27 T. J. Lu, Z. C. Xia, and J. W. Hutchinson, " Delamination of Beams under Transverse
Shear and Bending," Mater. Sci. Eng. A188, 103-12 (1994).
4.28 B. N. Cox, R. Massabò, and K. Kedward, “The Suppression of Delaminations in
Curved Structures by Stitching,” Composites, in press.
4.29 T.-J. Lu and J. W. Hutchinson, "Role of Fiber Stitching in Eliminating Transverse
Fracture in Cross-Ply Ceramic Composites," J. Amer. Ceram. Soc. 78, 251-3 (1995).
4.30 L. K. Jain and Y.-W. Mai, “On the Effect of Stitching on Mode I Delamination
Toughness of Laminated Composites,” Composites Science and Technology 51, 331-
45 (1994).
4.31 B. V. Sankar and S. K. Sharma, "Effects of Stitching on Fracture Toughness of
Uniweave Textile Graphite/Epoxy Laminates," in Mechanics of Textile Composites
Conference, ed. C. C. Poe, Jr., and C. E. Harris, NASA Conf. Publ. 3311, October,
1995.
4.32 R. Massabò and B. N. Cox, "Concepts for Bridged Mode II Delamination Cracks,"
submitted to Mechanics of Materials.
4.33 B. N. Cox and D. B. Marshall, “Concepts for Bridged Cracks in Fracture and
Fatigue,” Acta Metall. Mater. 42[2], 341-63 (1994).
4.34 G. Bao and Z. Suo, “Remarks on Crack Bridging Concepts," Appl. Mech. REv. 24,
355-66 (1992).
4.35 B. N. Cox, “Lockup, Chains, and the Delocalization of Damage,” J. Mater. Sci., in
press.
4.36 K. S. Chan, M. Y. He, and J. W. Hutchinson, "Cracking and Stress Redistribution in
Ceramic Layered Composites," Mater. Sci. Engng A167, 57-64 (1993).