A SERVICE OF

logo

Instruments and Controls Operating Instructions
– 36 – Y53-6008
Medium Duty (R10/06)
Using the Parking Brake
1. Come to a complete stop.
2. Apply the parking brake. Pull upward on the parking
brake lever until it reaches an over (top) center posi-
tion. (The PARK light on the dash will come on.)
NOTE: Ensure the lever is over center. The light will
come on prior to brake being fully applied.
3. Shift the transmission into NEUTRAL position:
4. Turn the key OFF.
5. Remove the key.
6. If you are parked on a grade, always block the
wheels.
PARKING BRAKE LEVER
ENGAGE
DISENGAGE
PARKING BRAKE INDICATOR
PARK
P
CRUISE
CONTROL
STOP
ENGINE
CHECK
ENGINE
SPOT
LIGHT