INCR. SURR.
SETTING UP A NEW OR MULTIBRAND ACCESSORY DEVICE
While in the SETUP menu, press
the CURSOR DOWN button twice
to highlight CHOOSE BRAND.
Press the CURSOR LEFT or
CURSOR RIGHT button to enter the
CHOOSE BRAND menu.
Press the CURSOR DOWN but-
ton once to highlight NEW.
Press the CURSOR LEFT or
CURSOR RIGHT button. “NEW”
will move to the upper right corner
under the device name and source.
Press the CURSOR LEFT or
CURSOR RIGHT button again. The
LEARN menu will move to the left.
NOTE: You can go through the learn-
ing process in manual or automatic
mode.
Manual mode—If you press the
CURSOR UP, DOWN, RIGHT, or
LEFT button within three seconds of
entering the LEARN menu, you can
manually control the learning process;
that is, you can then press the CUR-
SOR UP or CURSOR DOWN button
to highlight a remote function
(POWER/STBY, PLAY, STOP, etc.) of
your choice and then press the CUR-
SOR LEFT or CURSOR RIGHT but-
ton to select the function (the item will
blink, indicating that the IR Blaster is
ready to receive transmission from the
accessory device remote control).
OR
Automatic mode—If you don’t press
the CURSOR UP, DOWN, RIGHT, or
LEFT button within in three seconds
of entering the LEARN menu, the first
function (POWER/STBY) will auto-
matically become ready for learning
(the function will blink). As each item
is learned, the highlight bar will auto-
matically move to the next function to
be learned and the function will
become ready for learning.
Please continue to the next page . . .
C
HOOSING THE
B
RAND
AND
L
EARNING
R
EMOTE
C
OMMANDS
