INCR. SURR.
.......... ..........
SETTING UP A NEW OR MULTIBRAND ACCESSORY DEVICE
To learn an accessory device
remote control function: Point the
remote control of the accessory
device at the IR Blaster (Hold the
remote control no farther than about
four and one-half inches from the IR
Blaster.) Then press the button on
the remote control that corresponds
with the highlighted function in the
LEARN menu (POWER/STBY,
PLAY, STOP, etc.). If M-Link
™
rec-
ognizes the button code, a sound
feedback (a beep) will occur to indi-
cate that the function has been
learned. If M-Link
™
doesn’t recog-
nize the button code, the sound
feedback will not occur.
After you’ve had M-Link
™
learn all the functions you want,
press the M LINK button button
to remove the menu from the
screen.
The next section will tell you how
to test the remote control commands
of your accessory devices to ensure
that they are working properly with
M-Link
™
.
It is important that you have M-Link
™
learn the
functions that are necessary for basic operation of
each New or Multibrand accessory device that you set
up to work with M-Link
™
(for example:
POWER/STBY, PLAY, STOP, PAUSE, FF/FORWARD,
REW/REVERSE, as appropriate for the device).
Otherwise, you may not be able to use the colored macro
buttons (ITR/REC, HOME VIDEO, HOME MOVIES,
and PERSONAL) on your TV’s remote control to power
ON and play the devices; and you may not be able to use
your TV’s remote control to work basic functions of the
new or multibrand device (for example: PLAY, PAUSE,
STOP, FF/FORWARD, REW/REVERSE).
By pressing the SOURCE button, you will be able to
toggle from your TV’s tuner (or tuners [A or B], depend-
ing on your model) to the accessory devices you have set
up to work with M-Link
™
. Remember that when an
accessory device is selected as your source (VCR1, for
example), you cannot then use the number buttons or
channel (+) or (–) buttons to change the TV’s channels;
you must press the SOURCE button until you have
selected a tuner source and then press the number but-
tons or channel (+) or (–) buttons.
SMART HELP
