T
he picture for the PIP window
can come through either the
ANT(enna) A / B Inputs or the AUX
Video Inputs (on the rear and side
of the TV). PIP Picture Source
simply tells the TV which one of
these sources it is to show in the
PIP window.
Select PIP SOURCE control.
With FEATURES MENU (4 of 5)
on screen, move the RED highlight
with the MENU (M) buttons.
Then press the MENU button.
Press the MENU ▲▼ and
MENU (M) buttons to highlight
and select the desired (ߜ) PIP
Picture Source.
ANT A or B- for a picture signal
coming from either the ANT(enna)
A or B Input plug on the TV.
Note: The remote control’s
button can also be used to quickly
swap between the picture sources
for the TV’s Main screen and the
PIP window.
AUX 1 VIDEO - for a picture
signal coming from the AUX 1
VIDEO IN jack on the rear of the
TV.
AUX 2 VIDEO- for a picture
signal coming from the AUX 2
VIDEO IN jack on the rear of the
TV.
SIDE VIDEO- for a picture signal
coming from the SIDE VIDEO
Input jack on the right side of the
TV cabinet.
Press the STATUS button to
clear the screen.
SELECTING THE PICTURE SOURCE FOR PIP
PIP SOURCE
SMART HELP
Remember, the PIP
window will be blank unless
a signal is connected to the
selected PIP Picture Source (ANT
B, AUX VIDEO, SIDE VIDEO,
etc.) on the set.
If you see the same picture on the
main screen and in the PIP
window, you may have the Main
Screen and PIP window set to the
same video input source.
