Chapter 3: Getting To Know The WORKABOUT PRO
Audio Indicators
38
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
If the unit is attached to an external power supply, the hand-held LED reflects the
battery charge status.
Table 3.1 WORKABOUT PRO LED BEHAVIOUR
3.8.2 Audio Indicators
The audio speaker provides a variety of sounds when a key is pressed, a keyboard
character is rejected, scan input is accepted or rejected, an operator’s entry does not
match in a match field or the battery is low. To specify how you want your WORK-
ABOUT PRO to respond under various conditions, refer to “Sound & Notifica-
tions” on page 96.
The volume keys are located above <A> and <B> on WORKABOUT PRO C
models and
to the left and right of the arrow key on WORKABOUT PRO S models
.
The increase volume key is labelled with a plus symbol and the decrease
volume key is labelled with a minus symbol .
3.8.2.1 Adjusting Speaker Volume On The WORKABOUT PRO C
•
Press the <BLUE> key twice to lock the key ‘on’ and then, press <A>—the
increase volume key or <B>—the decrease volume key until
the volume meets your requirements.
• Remember to press the <BLUE> key again to turn it ‘off’.
3.8.2.2 Adjusting Speaker Volume On The WORKABOUT PRO S
• Press the <FN/BLUE> key twice to lock the key ‘on’ and then, press the
<RIGHT> arrow key—the increase volume key or the <LEFT>
arrow key—the decrease volume key until the volume meets your
requirements.
• Remember to press the <FN/BLUE> key again to turn it ‘off’.
LED Behaviour Charge Status
Solid Green Charge complete.
Fast Blinking Green
Charge in progress. Battery charged to less than 80%
capacity.
Slow Blinking Green Battery charged to greater than 80% of capacity.
Solid Red Temperature outside charge range (0° C to 50° C).
Blinking Red Battery is not charging. Battery fault.
