7
Power Selector Switch
The power selector switch controls the speed of the Rainbow’s motor.
HIGH: Use this setting for general cleaning.
OFF: Turns the entire unit o.
LOW: Use this setting for cleaning the air. (See page 13.)
Trigger Lock Switch
The hose handle’s trigger lock switch controls the functionality of the electried hose when using the Power Nozzle,
RainbowMate, RainJet and AquaMate.
FORWARD POSITION: Locks trigger - power is o.
MIDDLE POSITION: (Recommended) Squeeze trigger to activate or release to turn
o.
BACKWARD POSITION: Trigger is locked - power is on.
Airow Control Vent
The airow control vent on the hose handle can be opened or closed to control airow when vacuuming delicate
items such as curtains and to make the Power Nozzle easier to push on dense carpet. As you clean, you can quickly
determine the proper adjustment.
REDUCED AIRFLOW: Keep vent open and adjust as needed for dierent cleaning
jobs.
FULL POWER: Keep vent fully closed for maximum cleaning performance.
Attachment Caddy
Bring along your most used tools as you clean from room-to-room using the
convenient onboard Attachment Caddy. Attach to the front of the Rainbow by slipping
over the front of the housing into notches located on either side. Press downward to
lock in place. Attachments are stored by slipping them over the posts on the caddy. The
attachment caddy can also be attached to the wand.
power & control at your ngertips
