Manual-4
Feature
1) Perfect-Q™ : What you see is what you get
2) Proportional-Q: Classic smooth response
3) Independent Accelerated-Slope™ 3-band tone controls
4) Low-cut and High-cut lters
5) Input and Output level controls
6) Eight segment metering for each input and output
7) Two Boost / Cut ranges: ± 6 dB or ± 12 dB
8) Each audio channel may use A or B controls
9) Analog controls
10) XLR, TRS and Euroblock Phoenix connectors
11) Bypass switch (DSP)
12) Bypass relay (power failure)
13) Exceptional RF and Magnetic immunity
14) Universal switching power supply
15) Cut-Only mode
Benefit
1) No EQ lter interaction. Response matches slider settings.
2) Familiar response. Smooth tone contouring.
3) Adjust Tone response without moving a dozen EQ sliders.
4) Band limit for application: Voice, Music, Headphones, etc.
5) Optimize dynamic range. Match the level after the EQ.
6) Allows accurate use of the level controls.
7) Select control resolution and range for the application.
8) Stereo Linking; Two “analog memories”; A-curve / B-curve comparison.
9) Quick control access with one control, one function, no confusion.
10) Connector matches your cables.
11) EQ in/out compare. Bypass Filters only or bypass Filters and Level controls.
12) No pops on turn-on or turn-o. Passes signal when power is o.
13) Works in high RF environments. Works next to power amps.
14) Works virtually anywhere in the world.
15) Maximum level of precision.
Graphic EQ Controls
Control each of the thirty bands of EQ with high resolution, 256
step slide controls. e center detent position guarantees a at
response. Perfect-Q™ lters guarantee accurate graphic response
and no band interaction.
e elimination of band interaction means the DEQ lters
are suitable for “ringing out a room” and capable of the very
subtle adjustments required by the most demanding user. Unlike
previous designs that act upon a bandwidth of up to one octave
when cut 12 dB, Perfect-Q only aects the intended 1/3 octave.
For the rst time, the user is able to adjust a single 1/3 octave
band with no aect on adjacent bands. e lack of band interac-
tion guarantees slider settings accurately indicate frequency
response.
For full details and comparisons to previous EQs, see
“Perfect-Q: e Next Step in EQ Design” included with this
manual.
Control Surface
All graphics are screened on the reverse side of a durable Lexan
surface. e graphics remain clear even after years of life on the
road.
Universal Switching Power Supply
e DEQ 60L operates on any AC mains from 100 VAC to 240
VAC, 50 Hz or 60 Hz. e line cord attaches to a standard IEC
appliance inlet, shipped with each unit.
Security
An optional 5.2" security cover is available as an accessory for
the DEQ 60L.
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 USA TEL 425-355-6000 FAX 425-347-7757 WEB www.rane.com
106692
