A SERVICE OF

logo

Open as PDF
next previous
14
CHUCK REMOVAL
See Figure 13.
The chuck must be removed in order to use some
accessories. To remove:
Unplug your drill.
WARNING:
Failure to unplug your drill could result in acciden-
tal starting causing serious injury.
Using two open-end wrenches, loosen the chuck.
See
Figure 13.
This will loosen the chuck on the spindle. It can now be
unscrewed by hand.
TO RETIGHTEN A LOOSE CHUCK
See Figure 14.
The chuck may at times become loose on the spindle and
develop a wobble. To tighten, follow these steps:
Unplug your drill.
WARNING:
Failure to unplug your drill could result in acciden-
tal starting causing serious injury.
Using two open-end wrenches, tighten the chuck.
See
Figure 14.
This will tighten the chuck on the spindle.
OPERATION
Fig. 13
Fig. 14