A SERVICE OF

logo

Print Test Label
Command Structure <ESC>CT
Example: <ESC>CT
Placement: This command should be sent in a separate data
stream
Default: There is no default for this command.
Command Function To print a test label
Input to Printer
Printer Output
Special Notes 1. The Test Label can also be printed manually by simultaneously
pressing the FEED and READY INDICATOR buttons. When the
Test Label is manually initiated, the printer will be in the
hexadecimal print mode after it finishes printing. This mode is
used for diagnostic troubleshooting and lists the current status of
the printer configuration. (see Page 9 of the User’s Guide).
Page 95 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide