A SERVICE OF

logo

9
Putting the bodypack transmitter into operation
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser micro-
phones and instruments (e.g. guitars). DC powering of the condenser
microphones is via the audio input MIC/LINE ³ (3-pole special audio
socket).
̈ Use one of the recommended Sennheiser microphones or the CI 1-4
instrument cable (see “Accessories” on page 33).
̈ Connect the 3-pin special audio connector ƺ from the Sennheiser
microphone or instrument cable to the socket MIC/LINE ³.
̈ Lock the 3-pin special audio connector by screwing down the coupling
ring ƻ.
̈ Via the operating menu, adjust the sensitivity of the microphone/line
input (see page 20).
³
ƻ
ƺ