GB
72
4
Rotate the control wheel or press it up or down to
move the cursor and set the metering and groups for
remote mode.
• Rotate: Changes the setting value
Up or down: Changes the setting value
Center: Sets the value and returns to the normal indicator screen
Wireless remote setting table
• If [WL CTRL] (wireless control flash mode setting) in the MENU settings
is set to [CTRL], the remote group of the wireless remote settings will
operate the same whether it is REMOTE or REMOTE 2.
• If the flash mode in the wireless remote settings is [TTL], flash
compensation is not shown.
5 Change the zoom and power level in the same way, if
required.
• For more details about each dedicated settings screen, see “Manual zoom”
(page 42) and “Manual flash (M)” (page 55).
• When wireless remote is set, the minimum power level setting is 1/128
regardless of whether HSS in the MENU settings is set to ON or OFF.
• When the wireless remote setting is set to TTL, you can only change the
zoom.
Setting value Flash mode Group in remote use
TTL REMOTE TTL [REMOTE] group
TTL REMOTE 2 TTL [REMOTE 2] group
MANUAL REMOTE MANUAL [REMOTE] group
MANUAL REMOTE 2 MANUAL [REMOTE 2] group
Zoom indicator Power level indicator
