GB
76
• [MANUAL RATIO: ON] can be set when the camera is in M (manual)
mode.
It may also be available when the camera is not in M mode, if
[MANUAL MODE] in the MENU settings of the flash unit (page 93)
is set to [PASM].
• When [MANUAL MODE] is set to [MANUAL] and the camera is in
M mode, setting [MANUAL RATIO: ON] temporarily displays
[MANUAL RATIO: ON] so long as communication with the camera is
off. When communication with the camera starts, the display changes
to [TTL RATIO: ON].
• The zoom indicator is not shown when [RATIO: OFF] is set.
Off-camera flash setting:
Set your flash to WL RMT mode. If using this flash unit as an off-camera
flash, see page 71. (After setting to WL RMT mode, set the wireless remote
setting indicator to [TTL REMOTE] or [MANUAL REMOTE].) If using a
different flash, refer to the operating instructions supplied with that flash.
2 Attach the controller to the camera, and turn on the
power of the camera, controller, off-camera flash.
3 Set up the camera with the controller and the
off-camera flash.
• See page 64 for details.
4 Make sure that the controller and the flash unit are fully
charged.
• When the flash unit is fully charged in the wireless flash mode, the AF
illuminator on the front blinks, and the TEST button is lit in amber.
