![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/e/54/e54f3ff8-1136-43bf-8b8e-933fe7b97cd9/e54f3ff8-1136-43bf-8b8e-933fe7b97cd9-bga.png)
Hardware Setup SY-D6IBA
7
2-2 UNPACKING THE MOTHERBOARD
When unpacking the Motherboard, check for the following items:
Ø The SY-D6IBA 82440 BX AGP/PCI Motherboard
Ø The Quick Start Guide *
Ø The Installation CD-ROM *
Ø Two SCSI Driver Installation Diskettes
labeled “7800 Family Manager Set V2.10” (optional)
Ø Two CPU Retention sets
Ø One IDE Device Flat Cable
Ø One Floppy Disk Drive Flat Cable
Ø One 50-pin Fast SCSI Cable (optional)
Ø One 68-pin Ultra-Wide SCSI Cable (optional)
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the Motherboard from its anti-
static packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise, ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the Motherboard carefully, holding it by the edges.
You are now ready to start the installation.