A SERVICE OF

logo

Hardware Setup SY-D6IBA
19
To avoid damage to the system, install according to the following pin
assignment:
2. Chassis Cooling Fan (FAN 3)
Some chassis also feature a cooling fan. This Motherboard features
a FAN 3 connector to provide 12V power to the chassis fan. Connect
the cable from the chassis fan to the 3-pin connector labeled FAN 3.
Install according to the following pin assignment:
Note: FAN 1 and FAN2 must be installed for this Motherboard,
CHAFAN is optional.
1 2 3
GND 12V SENSOR
Slot1 #1 CPU Cooling Fan
FAN 1 Pin Assignment
1 2 3
GND 12V SENSOR
Slot1 #2 CPU Cooling Fan
FAN 2 Pin Assignment
1 2 3
GND 12V SENSOR
Chassis Cooling Fan
FAN 3
Pin Assignment