r-
SELCALL OPERATION
Receiver Quieting
Puts the receiver on "Quiet" Mode (also known as "Tone
Squelch" Mode). When enabled,the radio prevents any
unwanted conversations inthe channel from being heard
unless the call is specifically directed to you andthe
required SELCALLID to open the "Quiet" condition is
received.
To enable:
1. Select the channel you want to put in Quiet Mode using
either the UP/DOWN Switch or the Numeric Keypad.
Example: Choosing CH20 as your CALLChannel
[
LO
2
']
0
:
.
:"=:,
.
:
]
: ,L
2. Press the @ Keyfor about 1.5 seconds. You will hear
one beep and the TSQ inaicator appears 00 the LCD
Display.
<J!g)
LO
2..
...::
: e
Under this condition, the PTT Switch is temporarily disabled.
If you wish to use the same channel for normal communica-
tion, simply remove the Channel from Quiet Mode.
To deactivate the Quiet Condition:
1. Manually select the Tone Squelched Channel
2. Press the @ Key for about 1.5 seconds. Two beeps
will be heard and the TSQ indicator disappears from the
LCD display.
UH-O57
Page 22
