A SERVICE OF

logo

Open as PDF
next previous
Removing the base grille
(on some models)
For manual-defrost models: The base grille
will need to be removed when defrosting
the freezer.
To remove the grille:
1. Open the door.
2. Pull on both sides of the grille.
To replace the grille:
1. Line up grille support tabs with openings in
freezer cabinet.
2. Push firmly to snap grille into place.
3. Close the door.
Using the drain system
(on
The freezer’s drain system consists of:
l drain cap and sleeve (at the liner and
cabinet bottom); and
l drain hose.
The drain hose carries defrost water out of
the freezer, and through the area behind the
base grille, into a drain pan for disposal.
NOTE: The drain cap must be removed
before defrosting the freezer and replaced
securely afterward.
\
some models)
10