Filter
Top Products
- 10 -
Transfer door call
Nederlands
1. While answering door, press CALL (Room call) button. After
sounding a pretone, speak to the rest station(s).
2. At the called station(s), a pretone sounds, and both image and
audio of door are activated.
3. Transferred station answers by pressing once TALK button.
To end, press TALK button again.
(The channel with door station is held approx. 45 sec.)
4. Communicate with door station after pressing TALK button.
Lastly, press TALK button for standby.
5-7
For JA-2M(E)CD system
English
Turning on/off Alarm (activated by Motion-detect
sensor camera)
In standby, keep pressing TALK button for 5 seconds or more.
Release TALK button, after the SET tone is heard as follows;
TONE
STATUS OF SETTING
Peeh Alarm is off.
Prrr (3 sec.) Alarm is sensor-activated.
NOTES: The Alarm ON/OFF can not be changed during
communication.
After the power is turned back on (when power failed,
etc.), the station is put back to Alarm ON mode.
For JA-2M(E)CD system
Français
Turning on/off Alarm (activated by Motion-detect
sensor camera)
In standby, keep pressing TALK button for 5 seconds or more.
Release TALK button, after the SET tone is heard as follows;
TONE STATUS OF SETTING
Peeh Alarm is off.
Prrr (3 sec.) Alarm is sensor-activated.
NOTES: The Alarm ON/OFF can not be changed during
communication.
After the power is turned back on (when power failed,
etc.), the station is put back to Alarm ON mode.
For JA-2M(E)CD system
Deutsch
Turning on/off Alarm (activated by Motion-detect
sensor camera)
In standby, keep pressing TALK button for 5 seconds or more.
Release TALK button, after the SET tone is heard as follows;
TONE
STATUS OF SETTING
Peeh Alarm is off.
Prrr (3 sec.) Alarm is sensor-activated.
NOTES: The Alarm ON/OFF can not be changed during
communication.
After the power is turned back on (when power failed,
etc.), the station is put back to Alarm ON mode.
For JA-2M(E)CD system
Español
Turning on/off Alarm (activated by Motion-detect
sensor camera)
In standby, keep pressing TALK button for 5 seconds or more.
Release TALK button, after the SET tone is heard as follows;
TONE STATUS OF SETTING
Peeh Alarm is off.
Prrr (3 sec.) Alarm is sensor-activated.
NOTES: The Alarm ON/OFF can not be changed during
communication.
After the power is turned back on (when power failed,
etc.), the station is put back to Alarm ON mode.
For JA-2M(E)CD system
Nederlands
Turning on/off Alarm (activated by Motion-detect
sensor camera)
In standby, keep pressing TALK button for 5 seconds or more.
Release TALK button, after the SET tone is heard as follows;
TONE STATUS OF SETTING
Peeh Alarm is off.
Prrr (3 sec.) Alarm is sensor-activated.
NOTES: The Alarm ON/OFF can not be changed during
communication.
After the power is turned back on (when power failed,
etc.), the station is put back to Alarm ON mode.
TECHNICAL PRECAUTIONS
PRÉCAUTIONS TECHNIQUES
TECHNISCHE
VORSORGEMASSNAHMEN
PRECAUCIONES TÉCNICAS
TECHNISCHE
VOORZORGSMAATREGELEN
TECHNICAL PRECAUTIONS
English
* Operating temperature: 0°C ~ 40°C (+32°F ~ +104°F).
* Cleaning: Clean the units with a soft cloth dampened with
neutral household cleanser. Do not use any abrasive cleaner or
cloth.
* In case of system malfunction, turn off the power switch at
master station. If this doesn't solve the problem, shut DC power
down, and contact a qualified technician.
TECHNICAL PRECAUTIONS
Français
* Operating temperature: 0°C ~ 40°C (+32°F ~ +104°F).
* Cleaning: Clean the units with a soft cloth dampened with
neutral household cleanser. Do not use any abrasive cleaner or
cloth.
* In case of system malfunction, turn off the power switch at
master station. If this doesn't solve the problem, shut DC power
down, and contact a qualified technician.
TECHNICAL PRECAUTIONS
Deutsch
* Operating temperature: 0°C ~ 40°C (+32°F ~ +104°F).
* Cleaning: Clean the units with a soft cloth dampened with
neutral household cleanser. Do not use any abrasive cleaner or
cloth.
* In case of system malfunction, turn off the power switch at
master station. If this doesn't solve the problem, shut DC power
down, and contact a qualified technician.