- 4 -
WIRING
Deutsch
Wiring method
Wire the inside stations in a station-to-station manner.
Cable
1. Parallel cable or single-sheathed cable are recommended.
Vinyl jacket, PE(polyethylene) insulation cable is
recommended.
2. Never use loose wires, twisted pair cable or coaxial cable.
3. When using existing wires, which may contain unused wires,
it is suggested to terminate both ends of unused pair(s) with a
120Ω resistor.
WIRING
Español
Wiring method
Wire the inside stations in a station-to-station manner.
Cable
1. Parallel cable or single-sheathed cable are recommended.
Vinyl jacket, PE(polyethylene) insulation cable is
recommended.
2. Never use loose wires, twisted pair cable or coaxial cable.
3. When using existing wires, which may contain unused wires,
it is suggested to terminate both ends of unused pair(s) with a
120Ω resistor.
WIRING
Nederlands
Wiring method
Wire the inside stations in a station-to-station manner.
Cable
1. Parallel cable or single-sheathed cable are recommended.
Vinyl jacket, PE(polyethylene) insulation cable is
recommended.
2. Never use loose wires, twisted pair cable or coaxial cable.
3. When using existing wires, which may contain unused wires,
it is suggested to terminate both ends of unused pair(s) with a
120Ω resistor.
1-2
Wiring distance
Wiring distance
Wiring
Wiring distance
Wiring distance
NAMES
NOMES
BEZEICHNUNGEN
NOMBRES
BENAMINGEN
NAMES & FUNCTIONS
English
[1] Speaker
[2] Door call-in LED (Door 1)
[3] Door call-in LED (Door 2)
[4] Room CALL button
[5] DOOR RELEASE button
[6] Mic.
[7] TALK button
[8] Transmit LED
[9] Door call-in selector: 1, 2 or 1&2
[10] Chime TONE volume control
NAMES & FUNCTIONS
Français
[1] Speaker
[2] Door call-in LED (Door 1)
[3] Door call-in LED (Door 2)
[4] Room CALL button
[5] DOOR RELEASE button
[6] Mic.
[7] TALK button
[8] Transmit LED
[9] Door call-in selector: 1, 2 or 1&2
[10] Chime TONE volume control