Filter
Top Products
7
PLAYING FILLS
STEP 1
Begin by selecting a Pattern and pressing PLAY.
STEP 2
Press and release the FILL button while the main A Pattern is playing. You’ll hear a drum fill
that leads right into the associated B Pattern.
STEP 3
Press the FILL button again. A different fill will transition from the B Pattern back into the A
Pattern.
STEP 4
Fills do not always have to be transitional Patterns. Suppose an A Pattern is playing. If you
press the FILL button, a fill will start – but this time, keep the FILL button held down until after
the fill has finished playing. This cancels the transition to the alternate pattern (in this
example, the A pattern would continue playing).
PLAYING PATTERNS WITH THE PADS
The SR18 allows you to play sequences of Pattern by triggering Patterns with the pads. This mode is
called Pattern Play Mode.
STEP 1
Press the PTN PLAY button – this will enter Pattern Play
Mode. The display will indicate PATTERN PLAY.
STEP 2
Try tapping a pad. The Pattern associated with the
pad will begin playing. As the Pattern reaches its end,
it will continue to loop from the beginning.
STEP 3
Now try hitting another pad. The Pattern associated
with the pad will begin playing as soon as the
previously selected Pattern reaches its end.
STEP 4
To change the Pattern assigned to a pad, press the
PAGE UP button.
Press the pad which you would like to modify.
Now use the VALUE dial, INC / DEC, or number buttons to
select the Pattern to be triggered with the pad. You may also
specify A, B or Fill for the selected Pattern.
Finally, press PTN PLAY again to exit the edit screen and continue performing.