Filter
Top Products
BASIC OPERATIONS (CONT.)
REPLAY LOOP - The RELOOP (8) function allows you to return to your stored
loop at any time. The IN BUTTON (10) and OUT BUTTON (10) LEDs will indicate
a loop is stored in memory, and may be played at any time. To replay the loop,
press the RELOOP BUTTON (8). The IN BUTTON (10) and OUT BUTTON (10)
LEDs will again begin to flash indicating SEAMLESS LOOP mode has been
activated and your loop will immediately begin to play.
Figure 19
©American Audio® - www.AmericanAudio.us - CK 800Mp3 Instruction Manual Page 21
10. CHANGING THE TIME DISPLAY (53)/TIME BAR (52):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON (2), will change the
time display information (53) in the LCD (16). The following is a break down of
the time settings and their definitions:
1) REMAIN (48) - This details the time in the LCD (16) as the current tracks’
remaining running time.
2) ELAPSED (46) - This details the time in the LCD (16) as the current tracks’
elapsed running time.
3) TOTAL REMAIN (48) - This details the time in the LCD (16) as the current CD
total remaining running time (this is for CDs only).
TIME BAR INDICATOR - Details the time defined in the TIME METER (52) as a visual bar icon. As with the
TIME METER (52) this bar is also dependent on the selected time function [REMAIN (48) OR ELAPSED (46)].
This bar will begin to flash when a track is ending regardless of which time function you are in. Use the flash-
ing bar as a visual reminder that a track is ending.
Figure 20