Filter
Top Products
GENERAL FUNCTIONS AND CONTROLS CD PLAYER
A. TOP UNIT CONTROLS (FIGURE 3)
1. EJECT FUNCTION - Pressing this will eject
the CD. The eject function will only when the unit
is in pause or cue mode, this is to prevent acci-
dentally ejecting the disc when in play mode.
2. TIME BUTTON - The TIME button will switch
the time value described in the TIME METER
between ELAPSED PLAYING TIME, TRACK
REMAINING TIME, and TOTAL REMAINING TIME
(this is for CDs only).
3. SGL/CTN - This function allows you to choose
between single track play or continuous track
play (all tracks in order). This function also oper-
ates in RELAY (FLIP-FLOP) mode, when RELAY
is activated.
4. PITCH SLIDER - This slider is used to adjust
the playback pitch percentage. The slider is a
set adjustment and will remain set until the pitch
slider is moved or the pitch function has been
turned off. This adjustment can be made with
or without a disc in the drive. The pitch adjust-
ment will remain even if a disc has been removed
and will reflect on any other disc loaded into the
one disc, remove that disc and insert another,
of pitch being applied will be displayed in the
LCD (16).
5. PITCH ON/OFF BUTTON - This button is used
to switch the pitch function on and off. When
the button LED is lit the PITCH SLIDER (4) is
active. When the button LED is not lit, the PITCH
SLIDER (4) is not active. The pitch percentage
©American Audio® - www.AmericanAudio.us - CK 800Mp3 Instruction Manual Page 9
Figure 3
1
2
11
3
9
8
7
6
5
4
10
16
15
14
13
12