Filter
Top Products
©American Audio® - www.AmericanAudio.us - DV2 USB Instruction Manual Page 12
DV2 MIDI MAP(Hex)
name
Type
MIDI
Remarks
MicGain
VR
2C
MicHig
VR
2D
MicLow
VR
2E
CH1Gain
VR
2F
CH1EqHig
VR
30
CH1EqMid
VR
31
CH1EqLow
VR
32
CH2Gain
VR
33
CH2EqHig
VR
34
CH2EqMid
VR
35
CH2EqLow
VR
36
Master
VR
37
CueMix
VR
38
CueGain
VR
39
CH1Fader
VR
3A
CH2Fader
VR
3B
Crossfader
VR
3C
CH1Curve
VR
3D
CFCurve
VR
3E
CH2Curve
VR
3F
Ch1HigCut
SW/LED
01/01
Ch1MidCut
SW/LED
02/02
Ch1LowCut
SW/LED
03/03
Ch2HigCut
SW/LED
04/04
Ch2MidCut
SW/LED
05/05
Ch2LowCut
SW/LED
06/06
Level Mode/MASTER LR
SW/LED
07/07
TalkOver
SW/LED
08/08
Ch1PFL
SW/LED
09/09
Ch2PFL
SW/LED
0A/0A
Ch1Reverse
SW/LED
0B/0B
CFReverse
SW/LED
0C/0C
Ch2Reverse
SW/LED
0D/0D
PFL CH1/CH2
LED
0E
LEVEL L
LEVEL
0F
0~A(0~10)
LEVEL R
LEVEL
10
0~A(0~10)
Ch1FaderStar
SW
20
Ch2FaderStar
SW
21
Control Change messages are sent with status 0xBn, where “n” is the channel, for the specied CC
controller. Thus the controller MIDI ID is indicated with the channel along with the CC number. The
value from 0x00 to 0x7F, is directly related to the location of the controller.
These messages are used for switches. Control Change messages are sent with status 0x9n,
SWITCH On and Off value are 0x7F and 0x00, where “n” is the channel.
These messages are used for LED. Control Change messages are sent with status 0x9n, LED On
and OFF value 0x7F and 0x00, where “n” is the channel.
These messages are used for LEVEL. Control Change messages are sent with status 0x9n, LED
Off value is 0x00 and On value is related to LED amount, 0x01 with one LED, 0x02 with two LED....,
where “n” is the channel.