Atlas Sound TSD-SEQ6 Recording Equipment User Manual


  Open as PDF
of 8
 
Owner’s Manual
TSD-SEQ6
Sequencer Controller
AtlasSound.com – 3 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Front Panel Description
1. System Activation Switch -PresstoactivatetheONorOFFsequence.
2. System Activation Switch Security Cover-IfyoudonotwanttousetheFrontPanelActivation
Switch, place the security cover over the switch and secure using the retainer screw.
3. Power LED-IlluminatesBluewhen24VDCpowerispresent.
4. System Status/Ready LED-FlashesGreenduringasequenceandwillilluminatesteadilywhen
sequenceiscompleteindicatingthesystemispoweredup.WhentheLEDisOff,itindicatesthe
system is in the Off mode.
5. Channel Output LED-Eachofthe6outputshavetheirownLEDwhichilluminatesRedwhenthe
specific channel / output is active.
6. Bracket Retainer Points - Each TSD includes two mounting brackets for securing the TSD to a
cabinet or wall. Remove screws and align the bracket with the panel hole before firmly tightening
the screws.
3
2
14 5
66
6 6
 previous next