Filter
Top Products
1. SPEAKER SETUP
1.1 DOWNMIX
1.2 FRONT SPEAKER
1.3 CENTER SPEAKER
1.4 REAR SPEAKER
1.5 SUBWOOFER
2. SPDIF SETUP
Opens up the Speaker Setup page
LT/RT - Sound output is divided with the Left coming
out of the Left speaker and the Right coming out of the
Right speaker.
STEREO - Sound output is in Stereo Mode.
V SURR - Virtual Surround Sound
5.1CH-For5.1Channelsurroundsound
Set this based on the size of your front speaker
Set this based on the size of your front speaker
OFF: If you do not have a center speaker
OFF: If you do not have a rear speaker(s)
ON:Ifyouhaveasubwoofer
OFF:Ifyoudonothaveasubwoofer
SPDIF OFF: No digital audio output
SPDIF/ RAW: Digital audio output in RAW format. Normally used for DTS and Dolby Digital 5.1 signals
SPDIF/ PCM: Digital audio output in PCM format. Normally used for audio CD signal
?
?
?
?
?
?
?
?
?
?
?
?
?
Set this based on the size of your rear speaker
DVD System Setup Menu
--AudioSetupPage--
Audio
Dolby
Video
Preference
General
Speaker Setup
Spdif Setup
CH EQ Setup
3D Process
Stereo - Left and Right in true stereo
L - Mono - Left channel only (no vocals)
R- Mono - Right channel only (no music)
Mix-Mono - Virtual stereo
Sets the linear compression ratio to get different
compression results.
Optional settings: Off, 1/4, 1/2, 3/4, Full.
3.
4.
4.1
4.2
1. DUAL MONO
2. DYNAMIC
EQ Type Choose the EQ type that is most similar to the kind of music you are playing
TurnPROLOGICIIsurroundsoundonandoff.Whenitis
turned on, more options are available
Select a specific reverb sound or turn reverb off
?
?
?
3D PROCESS
PRO LOGIC II
REVERB MODE
Note: Can also be changed using the L/R button
on the remote control
●
●
●
●
CH EQ SETUP
Dolby Digital Setup
Audio
Dolby
Video
Preference
General
-- --Dolby Digital Setup
Dual Mono Stereo
Dynamic L-Mono
R-Mono
Mix-Mono