Filter
Top Products
Control features on the AT895CP are:
• Three-position Mode (pickup pattern) switch which provides
Full-field Adaptive ( ) Planar-adaptive ( ) and
Line + Gradient ( ) settings. (See page 5 for a full
explanation of the Mode settings).
• Audio filter switch with Flat, High-pass and Band-pass
settings.
• Monitor headphone jack with volume control.
• LCD battery condition indicator.
• Power switch with LED indicator.
The Basic System
AT895 Microphone
The AT895 Microphone itself is “all analog,” housing one
Audio-Technica MicroLine
®
element, four A-T cardioid
elements mounted in a co-planar diamond configuration, and
five mic preamps. The five amplified analog signals from the
microphone elements are sent individually down a special
detachable cable to the AT895CP Control Pack.
AT895CP Control Pack
The AT895CP Control Pack provides all the power, Digital
Signal Processing, and control for the AT895. Output from
the Control Pack is analog at mic-level (–23 dBV).
The lightweight, sturdy metal housing accepts a quick-change,
click-on Battery Housing for totally self-contained operation, if
desired. The Control Pack also operates on external 12-14V
DC — from an Anton/Bauer or similar-type battery source, or
from an AC adapter — via an industry-standard 4-pin XLR-type
connection.
3
No ribs
on “Top”
and “Bottom”
Ribs
on “Sides”
Model No.
“AT895”
at “Top”
Two System Configurations
The AT895 is available as the AT895/RK “Remote Kit” for
field use, and as the AT895/MK “Mount Kit” for studio and
fixed-install applications.
AT895/RK Remote Kit includes:
• AT895MIC Adaptive-array Microphone
• AT895CP Control Pack with attached belt clip
• AT895BH Click-on Battery Housing
• AT895PG Pistol-grip shock mount
• AT895Z Zeppelin-type windscreen
• AT895C-10 Special 6-conductor shielded Cable, 10' long
• AT895CC Carrying Case
AT895/MK Mount Kit includes:
• AT895MIC Adaptive-array Microphone
• AT895CP Control Pack
• AT895SC Shock-mount Stand Clamp with
5
/8"-27
threaded stud
• AT895PS1 Multi-input AC Power Supply with “120V” IEC
detachable power cord
• AT895C-25 Special 6-conductor shielded Cable, 25' long
All components and accessories are interchangeable and
available separately to augment systems or to use as “field
spares.” In addition, two accessory kits are available:
• AT895CK Conversion Kit adds the components needed
for an AT895/MK system to function as an
AT895/RK system.
• AT895FBK Fisher Boom Kit permits use of the AT895 on
a Fisher boom.
(See page 7 for a complete listing of available system
components and accessories.)
The AT895 Microphone and Control Pack are designed to
operate as a system only. Do not attempt to use these
components with other devices.
Fig. A AT895 Microphone