Filter
Top Products
1
Warning
Failure to observe the following warnings may lead to risk
of serious injury from fire or electric shock.
Before installing the card, you must refer to the owner’s manual of
the host device or to the Yamaha website to verify that your host
device supports this card, and to verify the number of cards that can
be installed in combination with other Yamaha or third-party cards.
• Do not attempt to disassemble or modify the card.
Do not apply excessive force to board connectors or
other board components. (Mishandling the board
may lead to shock, fire hazard, or equipment failure.)
• You must turn off the power of your device before you
begin installing the AVIOM16/o-Y1 card.
• Be sure to disconnect the power cable from the main
unit before installing this card (to eliminate shock
hazard).
Caution
Failure to observe the following precautions
may lead to personal injury, or may result in damage to
equipment or other property.
• Do not touch the board’s metallic leads (pins) when
handling the card. (Pins are sharp and may cause hand
cuts.)
• The card is electrostatic-sensitive. Before handling the
card, you should briefly touch the main unit’s metal
casing with your bare hand so as to drain off any static
charge from your body.
!
!