Filter
Top Products
5
Welcome
Thank you for purchasing the AVIOM16/o-Y1 A-Net® Output
Card for Yamaha® Digital Mixers. This User Guide is designed
to familiarize you with your new product and to have you up and
running in no time.
Features
The AVIOM16/o-Y1 interface card (or “Y1” card for short) provides a
host of professional features designed to make using A-Net Pro16™
monitoring products flexible and easy to configure in a variety of
professional audio situations.
Y1 A-Net Card Features:
• Sixteen audio channels
• One A-Net output, EtherCon® RJ45 connector
• Channel link switches for stereo channel pairing
• Compatible with all Yamaha digital mixing consoles
that use the Yamaha mini-YGDAI digital format for
expansion cards
• Compatibility modes for 8-channel and 16-channel
operation (the PM1D is 8-channel only)
• Test mode
The Y1 console interface card is designed to be electrically and
mechanically compatible with any Yamaha mixing product that
supports the mini-YGDAI card hardware specification. Consult the
documentation provided with your Yamaha product for additional
information.
The EtherCon Connector
The Neutrik® EtherCon connector is a dual RJ45 type connector. It
can receive a standard Category 5e cable or a cable fitted with the
special heavy-duty EtherCon connector.
When using a standard Cat-5e cable, plug the cable into the center
of the jack; release the cable by pressing on the small plastic tab built
into the cable connector.
The locking EtherCon connector is similar to an XLR cable, the kind
commonly used on microphones. Insert the EtherCon equipped
cable into the jack until it clicks and locks in place. To remove
the cable, press on the metal release tab at the top of the panel-
mounted EtherCon jack and pull the connector outward.