Filter
Top Products
14
SPECIFICATIONS
Frequency
Response
process mode Program controlled
bypass mode 10Hz to 50kHz +/-0.5dBu, -10dBu input
THD
process mode less than 0.025% at -10dBu input, 20-20kHz
bypass mode less than 0.002% at -l0dBu input, 20-20kHz
Maximum Output
+18dBu (may vary due to control settings)
Input Impedance
47k Ohms, unbalanced 1/4” phone jack or RCA jack
Output Impedance
1k Ohms, unbalanced 1/4” phone jack or RCA jack
Sensitivity
-45dBu for maximum process
Maximum Process
+12dBu boost at 5kHz, -10dBu input
Lo Contour
+12dBu boost at 50Hz, -10dBu input
Power
Requirements
U.S., Canada
and Japan
models
100-120VAC, 50/60Hz, 8 WATTS
220-240
models
220-240VAC, 50/60Hz, 8 WATTS
Fuse
For all models, replace with 250VAC, .2A slowblow type
fuse.
Dimensions
19”(W) x 5.5”(D) x 1.7”(H)
Shipping Weight
6.5 lbs.
* 0dBu = 0.775mVrms
Note: Due to continuing product improvement, specications and design are subject to change without notice.