Filter
Top Products
18
ULTRALINK UL2000M
4. APPLICATION EXAMPLE
Fig. 4.1 shows how easy it is to use the products from the BEHRINGER ULTRALINK Series.
Simply connect the balanced XLR output on the ULR2000 to the XLR input on your mixing console.
Of course, you can use the receiver’s TRS output to connect to the next device in the signal path.
Fig. 4.1: Wiring the ULR2000 receiver and the ULM2000 microphone
5. INSTALLATION
5.1 Installation information
Always make sure that the devices are not operated in direct proximity of large metallic surfaces
(radiators, metal racks, reinforced concrete walls and similar).
The devices should always be at a height of at least 1 m (3 ft.) off the ground.
To assure good reception in many different positions, we advise against having the antennae point at
a 90-degree angle. Instead, antennae should be arranged at an angle of no more than 40° in respect to
one another.
To assure interference-free reception, ideally there should be no large objects placed between the
transmitter and the receiver. Not only the size but also the type of material play a role in determining
how strong signal interference will be!
If you want to install your ULR2000 in a rack, please read the following chapter; there you can find all
the necessary information.
5. INSTALLATION