Filter
Top Products
5 EUROLIVE B1520DSP User Manual
1. Introduction
The B1520DSP is a state-of-the-art digitally controlled PA speaker system that
will simply blow you away. Its bi-amped 600-Watt engine drives a high-
eciency 15" woofer for brutal punch and a 1.75" titanium driver for high-end
resolution. The built-in mixer allows you to run the show without any extra
equipment. A powerful 24-bit DSP controls the crossover, a dual compressor/
limiter, phase and time corrections and even a noise gate. The intelligent dynamic
EQ makes sure your system sounds perfect at any sound level.
◊ Please read this manual to familiarize yourself with the control
elements of the unit and its functions. After you have carefully read
this manual, keep it for future reference.
1.1 Before you get started
1.1.1 Shipment
Your B1520DSP was carefully packed at the assembly plant to assure secure
transport. Should the condition of the cardboard box suggest that damage may
have taken place, please inspect the unit immediately and look for physical
indications of damage.
◊ Damaged equipment should NEVER be sent directly to us. Please inform
the dealer from whom you acquired the unit immediately as well as
the transportation company from which you took delivery. Otherwise,
all claims for replacement/repair may be rendered invalid.
◊ Please always use the original packaging to avoid damage due to
storage or shipping.
◊ Never let unsupervised children play with the B1520DSP or with
its packaging.
◊ Please dispose of all packaging materials in an environmentally
friendly fashion.
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling. To avoid
overheating, do not place the B1520DSP on top of power amps or near
radiators,etc.
The mains connection is made using the enclosed power cord and a standard IEC
receptacle. It meets all international safety certication requirements.
◊ Please make sure that all equipment is properly grounded at all times.
For your own safety, never remove or disable the ground conductor of
the unit or of the AC power cord.
Important note concerning installation:
◊ The sound quality may diminish within the range of powerful
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
1.1.3 Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Shouldyour
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.
Thank you for your cooperation!