Filter
Top Products
Page 7 of 8
MICROPHONE INPUTS
PMP6000/PMP4000
Type XLR, electronically balanced
input circuit
Mic E.I.N. (20 Hz - 20 kHz)
PMP6000/PMP4000
@ 0 Ohm source resistance -134 dB/136 dB A-weighted
@ 50 Ohm source resistance -131.5 dB/134 dB A-weighted
@ 150 Ohm source resistance -129 dB/155 dB A-weighted
Frequency response < 10 Hz - 200 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +10 dB, +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 k Ohm balanced/
1.3 k Ohm unbalanced
Signal-to-noise ratio 109 dB/112 dB A-weighted
(0 dBu In @ +10 dB gain)
Noise (THD + N) 0.002%/0.0018% A-weighted
MONO LINE INPUTS
PMP6000/PMP4000
Type ¼" TS connectors, balanced
Impedance approx. 20 k Ohm
Max. input level +21 dBu
STEREO LINE INPUTS
PMP6000/PMP4000
Type ¼" TRS connectors, unbalanced
Impedance > 3.6 k Ohm
Max. input level +22 dBu
EQUALIZER
PMP6000/PMP4000
Low 80 Hz/+/-15 dB
PMP4000
Mid 2.5 kHz/+/-15 dB
PMP6000
Mid 100 Hz - 8 kHz/+/-15 dB
PMP6000/PMP4000
High 12 kHz/+/-15 dB
2 TRACK INPUT
PMP6000/PMP4000
Type RCA
Impedance approx. 3.6 k Ohm
PREAMP OUTPUTS
PMP6000/PMP4000
MAIN
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
MONITOR
PMP6000/PMP4000
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
STEREO OUTPUTS
PMP6000/PMP4000
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. input level +21 dBu
Type RCA
Impedance approx. 1 kOhm
Max. input level +21 dBu
LOUDSPEAKER OUTPUTS
PMP6000/PMP4000
Type Professional locking connector
Load impedance:
MAIN L/R 4 - 8 Ohm
MONITOR/MAIN MONO 4 - 8 Ohm
MAIN MONO/MAIN MONO 4 - 8 Ohm
BRIDGE 8 - 16 Ohm
DSP
PMP6000/PMP4000
Converter 24-bit Delta-Sigma,
64/128-times oversampling
Dynamics D/A 90 dB
Sampling rate 46.875 kHz
Delay Time max. 5 secs
Signal run time approx. 1.5 ms
(Line In > Line Out)
DISPLAY
PMP4000
Type 2-digit, 7-segment LED
PMP6000
Type 2 x 2-digit, 7-segment LED
OUTPUT POWER
RMS @ 1% THD, both channels driven:
PMP6000
8 Ohm per channel 300 W
4 Ohm per channel 600 W
RMS @ 1% THD, bridged mode:
PMP6000/PMP4000
8 Ohm 1,200 W
Peak Power, both channels driven:
PMP6000/PMP4000/PMP1680S
8 Ohm per channel 400 W
4 Ohm per channel 800 W
Peak Power, bridged mode:
PMP6000/PMP4000
8 Ohm 1,600 W
POWER SUPPLY
Mains voltage
PMP6000/PMP4000
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50/60 Hz
Europe/Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Fuse 100 - 120 V~ T 10 A H 250 V
Fuse 220 - 240 V~ T 6.3 A H 250 V
POWER CONSUMPTION
PMP6000/PMP4000
Power consumption 1,050 W
Mains connector IEC standard receptacle
DIMENSIONS/WEIGHT
PMP4000
Dimensions (H x W x D) 4 / x 18 / x 18 /"
122 x 476 x 460 mm
PMP6000
Dimensions (H x W x D) 4 / x 23 / x 19 /"
122 x 596 x 496 mm
PMP4000
Weight 22.9 lbs/10.38 kg
PMP6000
Weight 28.9 lbs/13.1 kg
EUROPOWER
PMP6000
PMP4000
PMP1680S