Behringer PMP6000/PMP4000/PMP1680S Music Mixer User Manual


 
Page 8 of 8
For service, support or more information contact the BEHRINGER location nearest you:
Europe
MUSIC Group Services UK
Tel: +44 156 273 2290
Email: CARE@music-group.com
USA/Canada
MUSIC Group Services NV Inc.
Tel: +1 702 800 8290
Email: CARE@music-group.com
Japan
MUSIC Group Services JP K.K.
Tel.: +81 3 6231 0454
Email: CARE@music-group.com
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only.
Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands. 985-10000-00448
PMP1680S
MICROPHONE INPUTS
Type XLR, electronically
balanced input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm source resistance -112 dB/114 dB A-weighted
@ 50 Ohm source resistance -112 dB/114 dB A-weighted
@ 150 Ohm source resistance -112 dB/114 dB A-weighted
Frequency response < 10 Hz - 200 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +30 dB, +10 dB with pad
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.2 kOhm balanced/
1.1 k Ohm unbalanced
Signal-to-noise ratio 110 dB/114 dB A-weighted
(0 dBu In @ +10 dB gain)
Noise (THD + N) 0.001%/0.0007% A-weighted
MONO LINE INPUTS
Type ¼" TS connectors, balanced
Impedance approx. 20 kOhm, balanced
Max. input level +21 dBu
STEREO LINE INPUTS
Type ¼" TRS connectors, unbalanced
Impedance approx. 100 kOhm,
unbalanced
Max. input level +21 dBu
EQUALIZER
Low 80 Hz/+/-15 dB
Mid 2.5 kHz/+/-15 dB
High 12 kHz/+/-15 dB
CD/TAPE INPUT
Type RCA
Impedance approx. 10 k Ohm
PREAMP OUTPUTS
MAIN
Type ¼" TS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
MONITOR
Type ¼" TS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
STEREO OUTPUTS
Type ¼" TRS connectors,
unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. input level +21 dBu
Type RCA
Impedance approx. 1 kOhm
Max. input level +21 dBu
LOUDSPEAKER OUTPUTS
Type Twist-lock professional
speaker connector
Load impedance:
MAIN L/R 4 - 8 Ohm
MONITOR/MAIN MONO 4 - 8 Ohm
MAIN MONO/MAIN MONO 4 - 8 Ohm
BRIDGE 8 - 16 Ohm
DSP
Converter 24-bit Delta-Sigma,
64/128-times oversampling
Dynamics D/A 90 dB
Sampling rate 40 kHz
Delay Time max. 5 secs
Signal run time approx. 1.5 ms
(Line In > Line Out)
DISPLAY
Type 2 x 2-digit, 7-segment LED
OUTPUT POWER
RMS @ 1% THD, both channels driven:
8 Ohm per channel 300 W
4 Ohm per channel 600 W
RMS @ 1% THD, bridged mode:
8 Ohm 1200 W
Peak Power, both channels driven:
8 Ohm per channel 400 W
4 Ohm per channel 800 W
Peak Power, bridged mode:
8 Ohm 1600 W
POWER SUPPLY
Mains voltage
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50/60 Hz
Europe/Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Fuse 100 - 120 V~ T 10 A H 250 V
Fuse 220 - 240 V~ T 6.3 A H 250 V
POWER CONSUMPTION
Power consumption 1050 W
Mains connector IEC standard receptacle
DIMENSIONS/WEIGHT
Dimensions (H x W x D) 12 / x 18 / x 8 /"
315 x 460 x 220 mm
Weight 21.8 lbs/9.9 kg
Please note these specications are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not
to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon
request of the owner.
EUROPOWER
PMP6000
PMP4000
PMP1680S