Filter
Top Products
behringer.com
10 EURODESK SX4882 User Manual
Direct outputs5.2
Each of the 24 main channels on the EURODESK SX4882 has its own DIRECT
OUTPUT, which is taken from a point immediately after the fader (i.e. post EQ
and after the aux sends, see block schematics). This can feed a tape track directly
without having to resort to the subgroups, enabling more than eight dierent
tracks to be recorded simultaneously. Almost alone among the EUROjacks,
these are on unbalanced mono sockets at +4 dB. (See section 22 “Input/output
conguration”, also section 16.1 “Recording”.)
Master Panel6.
Aux masters6.1
Aux sends6.1.1
Much of the master section is taken up by master aux sends and returns.
We’ll start with the sends (see g. 6.1).
Stacked in a vertical column are six master aux send levels, one for each of
buses 1 to 6 (
P 41
to
P 46
). Each one has a gain structure of minus innity to
+15 dB. The extra 15 dB of gain comes in once a knob passes a center detente
(representing the “normal” unity gain position), enabling insensitive outboard
FX to be properly driven. Each aux send has a SOLO button (
S 41
to
S 46
),
and, as with other areas of mixer, a LOCAL SOLO LIGHT (
L 47
), which illuminates
when any of the AUX master sends are solo-ed. This is to help you see exactly
what has been solo-ed. Any experienced engineer will have had occasion to
search painstakingly through every solo button on his/her console trying to nd
out why the main solo light was on, and the control room monitors silent!
Fig. 6.1: Aux sends.