14 15XENYX QX1832USB/QX1222USB Quick Start Guide
XENYX QX1832USB/QX1222USB Controls
(EN) Step 2: Controls
(13) FX SEND knob/fader adjusts the amount of
signal sent to the internal multi-FX processor
or an external eects processor via the
FX SEND jack.
(14) GRAPHIC EQ adjusts specic frequencies in
the soundspectrum.
(15) XPQ SURROUND knob adjusts the amount
of stereo enhancement on the mix. Press the
XPQTO MAIN button to activate the eect.
(16) VU METER displays the MAIN OUTPUT
signallevel.
(17) PHONES/CTRL ROOM knob adjusts
the headphone or studio monitor
(QX1832USB)volume.
(18) VOICE CANCELLER button lters out vocal
frequencies from audio plugged into the
2-TRACK INPUT, enablingyour mixer to act as a
karaokemachine.
(19) MODE button (QX1832USB only) determines
whether the channels’ SOLO button operates
as ‘Soloin Place’ (buttonout) or ‘Pre-Fader
Listen’ (button in). PFL is preferred for gain
settingpurposes.
(20) MON SEND fader adjusts the amount of
signal sent to a monitor speaker via the
MONOUTjack.
(21) FX/AUX2 RET fader (QX1832USB only)
adjuststhe amount of internal or external
eects included in themix.
(22) SUB 1-2 faders (QX1832USB only) adjust the
output of the SUBOUTPUT jacks.
(23) MAIN MIX faders adjust the overall output of
themixer.
(24) SOURCE buttons (QX1832USB only) routethe
USB/2-TR, SUB1-2, and MAIN MIX to the
PHONES and CONTROLROOM jacks.
(25) FX TO MON and FX TO MAIN knobs
(QX1222USB only) adjust the amount of signal
from the internal multi-FX processor or an
external eects processor that is included in
the main or monitor mix.
(26) STANDBY button (QX1222USB only) mutes all
microphonechannels.
(27) USB/2-TR RTN fader (QX1222USB only)
adjusts the level of the 2-track RCA inputs or
USB input.
(28) AC IN accepts the included power cable for
connection to amains outlet.
(29) POWER ON switch turns the mixer on and o.
(30) PHANTOM ON switch sends 48 V to the XLR
inputs for use with condenser microphones.
(31) LOW CUT button eliminates unwanted low
frequencies from the channel.
(32) AUX 1 SEND knob (QX1832USB) adjusts the
level of the AUX 1 signal sent to an eects
processor or monitor speaker.
(33) AUX 1 RETURN knob (QX1832USB) adjusts the
level of the signal returning from an eects
processor to the AUX 1 RETURN jacks.
(34) USB/2-TR TO MAIN button (QX1832USB)
routes the USB and 2-Track playback to the
MAIN MIX and mutes the USB/2-TR OUT
recording signal.
(35) LEVEL SET LED (QX1222USB only) is used for
setting the correct input level of the channel.
See the Gain Setting section for more details.
(ES) Paso 2: Controles
(13) FX SEND, este control ajusta la cantidad
de señal que se envía al procesador de
multiefectos interno o a un procesador de
efectos externo a través del jack FX SEND.
(14) GRAPHIC EQ ajusta las frecuencias
especícas en el espectro sonoro.
(15) XPQ SURROUND, este control ajusta la
cantidad de mejora estéreo de la mezcla.
Pulseel botón XPQ TO MAIN para activar
elefecto.
(16) VU METER muestra el nivel de señal
MAINOUTPUT.
(17) PHONES/CTRL ROOM, este control ajusta el
volumen de los auriculares o del monitor de
estudio (QX1832USB).
(18) VOICE CANCELLER, este botón ltra las
frecuencias vocales del audio conectado a
la entrada 2-TRACK, permitiendo a la mesa
de mezclas funcionar como un equipo
dekaraoke.
(19) MODE (QX1832USB), este botón determina si
el botón SOLO de los canales funciona como
‘Soloin Place’ (botón sin pulsar) o ‘Pre-Fader
Listen’ (botón pulsado). Espreferible la
escucha pre-fader para ajustar laganancia.
(20) MON SEND, este fader ajusta la cantidad
de señal que se envía hasta un altavoz de
monitoreo a través del jack MONOUT.
(21) FX/AUX2 RET (QX1832USB), este fader
ajusta la cantidad de efectos internos o
externos incluida en lamezcla.
(22) SUB 1-2 (QX1832USB), estos faders ajustan
la salida de los jacks SUB OUTPUT.
(23) MAIN MIX faders adjust the overall output
of themixer.
(24) SOURCE, estos botones (QX1832USB) pase el
USB/2-TR, SUB 1-2 y MAIN MIX al PHONES y
las tomas CONTROL ROOM.
(25) FX TO MON y FX TO MAIN (QX1222USB),
estos controles ajustan la cantidad de señal
del procesador de multiefectos interno o de
un procesador deefectos externo incluido en
la mezcla principal o delmonitor.
(26) STANDBY (QX1222USB), este botón silencia
todos los canales demicrofono.
(27) USB/2-TR RTN (QX1222USB), este fader
ajusta el nivel de las entradas 2-track RCA o
entrada USB.
(28) ENTRADA DE AC acepta el cable de
alimentación que se incluye para la conexión
a una toma de corriente.
(29) POWER ON, este interruptor enciende y
apaga la mesa demezclas.
(30) PHANTOM ON, este interruptor envía 48V a
las entradas XLR para usarlas con micrófonos
de condensador.
(31) El botón LOW CUT elimina las bajas
frecuencias no deseadas del canal.
(32) El mando AUX 1 SEND (QX1832USB)
lepermite ajustar el nivel de la señal
AUX1 enviada a un procesador de efectos
omonitor.
(33) El mando AUX 1 RETURN (QX1832USB)
ajusta el nivel de la señal de retorno
procedente de un procesador de efectos
y que es recibida a través de las tomas
AUX 1 RETURN.
(34) El botón USB/2-TR TO MAIN (QX1832USB)
dirige la señal de reproducción USB y de
dos pistas a la salida principal o MAIN MIX y
anula la señal de grabación USB/2-TR OUT.
(35) El piloto LEVEL SET (solo QX1222USB) se usa
para ajustar el nivel de entrada correcto del
canal. Vea la sección de Ajuste de ganancia
para más detalles.
(1) USB wireless input accepts a USB
receiver for use with BEHRINGER ULM
wirelessmicrophones.
(2) GAIN knob adjusts the sensitivity of the MIC
and/or LINE inputs.
(3) COMP knob adjusts the amount of
compression eect on the channel.
(4) EQ knobs adjust the high, mid and low
frequencies of the channel. Adjust the FREQ
knob on the QX1832USB to select the specic
frequency adjusted by the MIDknob.
(5) MON knob adjusts how much of the channel’s
signal routes to the MON SEND/OUT jack.
(6) AUX 1 knob (QX1832USB only) adjusts how
much of the channel’s signal routes to the
AUX1 jack. Press the PRE button when using
AUX 1 as an extra monitor send.
(7) FX knob adjusts how much of the channel’s
signal routes to the internal multi-FX
processor or the AUX SEND 2/FX SEND jack.
(8) PAN/BAL knob positions the channel in the
stereo eld.
(9) MUTE button mutes the channel.
(10) CLIP LED lights when the channel
signaloverloads.
(11) CHANNEL FADER adjusts the channelvolume.
(12) MULTI-FX PROCESSOR adds a selected sound
eect to any channels whose FX knob is
turned up. Seethe Multi-FX Processor section
fordetails.
(1) La entrada inalámbrica USB acepta un
receptor USB para su uso con micrófonos
inalámbricos BEHRINGER ULM.
(2) GAIN, este control ajusta la sensibilidad de las
entradas MIC y/oLINE.
(3) COMP, este control ajusta la cantidad de
efecto de compresión en el canal.
(4) EQ, estos controles ajustan las frecuencias
alta, mediay baja del canal. Ajuste el control
FREQ en el QX1832USB para seleccionar
la frecuencia especíca regulada con el
controlMID.
(5) MON, este control ajusta qué parte de la señal
del canal se dirige al jack MON SEND/OUT.
(6) AUX 1, este control (sólomodelo QX1832USB)
ajusta qué parte de la señal del canal se dirige
al jack AUX1. Pulse el botón PRE al usar AUX 1
como una señal de monitoradicional.
(7) FX, este control ajusta qué parte de la señal
del canal se dirige al procesador multiefectos
interno o al jack AUX SEND 2/FX SEND.
(8) PAN/BAL, este control sitúa el canal en el
campo estéreo.
(9) MUTE, este botón silencia el canal.
(10) CLIP, estos LED se iluminan cuando la señal
del canal sesobrecarga.
(11) CHANNEL FADER ajusta el volumen delcanal.
(12) MULTI-FX PROCESSOR añade un efecto de
sonido seleccionado a cualquier canal en el
que esté activado el control FX. Consultela
información detallada en la sección
Procesador demultiefectos.