Filter
Top Products
13
DVI, Audio & RS-232 Extender with EDID Management
13
3.2.2.6 Blank output:
To blank the video output.
Command........................................... Response
ASCII b or B (Hex 62 or 42)................Blank output (1=DVI – 2=UTP)
ASCII 1 (or Hex 31)............................................................DVI blanked
ASCII 2 (or Hex 32)........................................................... UTP blanked
3.2.2.7 Un-blank output:
To un-blank the video output
Command........................................... Response
ASCII u or U (Hex 75 or 55).......... Un-blank output (1=DVI – 2=UTP)
ASCII 1 (or Hex 31)...................................................... DVI un-blanked
ASCII 2 (or Hex 32)......................................................UTP un-blanked
3.2.2.8 Get status report:
Display the unit’s status report including the current EDID Routing, output
boost setting and the video output blank/un-blank status.
Command..........................................................
ASCII s or S (Hex 73 or 53)....................................................................
Response
Status Report
--------------------------
EDID Routing = DVI-Local (or UTP-Remote)
DVI Boost = Disabled (or Enabled)
UTP Boost = Enabled (or Disabled)
DVI Blank = off (or On)
UTP Blank = off (or On)