Filter
Top Products
English
Recording and Playback
E-19
2.
Press the AUDIO RECORDER button. Note
that you should press the button and
immediately release it. Do not hold it down.
• This causes the two SONG a button indicator
lamps to light.
3.
Press the SONG RECORDER button so its
lamp is lit.
4.
Start playing something on the keyboard.
• The SONG RECORDER button lamp will flash once
or twice to indicate that recording to the USB flash
drive has started.
NOTE
• Do not remove the USB flash drive from the USB
flash drive port while the two SONG a lamps are
flashing or lit. Doing so will interrupt recording and
may corrupt data.
5.
To stop recording, press the AUDIO
RECORDER button.
• The two SONG a button lamps will flash together
three or four times to let you know that audio
recording is complete. If you want to continue
recording, perform the operations from step 4 under
“Recording Digital Piano Play (Audio Recorder)”
(page E-18). If you want to play back what you
recorded, perform the operations from step 3 under
“Playing Back Data Recorded on a USB Flash Drive”
(page E-19). To exit the audio record/playback
operation, press the AUDIO RECORDER button.
Recording Digital Piano Play as Data
Recorded in Song Memory Plays Back
(Audio Recorder)
1.
Press the AUDIO RECORDER button. Note
that you should press the button and
immediately release it. Do not hold it down.
• This causes the two SONG a button indicator
lamps to light.
2.
Press the SONG RECORDER button so its
lamp is lit.
3.
Press the SONG a button.
• This will start playback of the current song memory
contents. Play along on the digital piano.
4.
To stop recording, press the AUDIO
RECORDER button.
• The two SONG a button lamps will flash together
three or four times to let you know that audio
recording is complete. If you want to continue
recording, perform the operations from step 4 under
“Recording Digital Piano Play (Audio Recorder)”
(page E-18). If you want to play back what you
recorded, perform the operations from step 3 under
“Playing Back Data Recorded on a USB Flash Drive”
(page E-19). To exit the audio record/playback
operation, press the AUDIO RECORDER button.
Playing Back Data Recorded on a USB
Flash Drive
1.
Press the AUDIO RECORDER button. Note
that you should press the button and
immediately release it. Do not hold it down.
• This causes the two SONG a button indicator
lamps to light.
2.
Press the SONG RECORDER button so its
lamp is lit.
C
AP450_e.book 19 ページ ２０１２年１１月２８日 水曜日 午後５時３８分