Filter
Top Products
E-32
USB Flash Drive
4.
Hold down the FUNCTION button as you use
the SONG SELECT keyboard keys to select
a song number (61 to 70).
• The digital piano will emit a short beep if you specify
a correct song number, and a long beep if the song
number is not correct.
5.
Press the SONG a button.
• This starts deletion of the selected data.
• When deleting is complete, the L/R lamps will go out
to indicate that the USB flash drive mode has been
exited.
You can use the procedure below to play back a user
song (page E-36) stored on a USB flash drive without
loading the song into digital piano Music Library
memory (song numbers 61 to 70).
1.
On your computer, copy the data you want to
play back on the digital piano into the
MUSICLIB folder on the USB flash drive.
• Of the song data in the MUSICLIB folder, you can
select any of the first 99 songs, sorted in file name
sequence, for playback.
2.
Insert the USB flash drive into the digital
piano’s USB flash drive port.
3.
While holding down the FUNCTION button,
press the keyboard key that corresponds to
the USB flash drive mode.
• This will cause the L/R lamps to flash.
4.
Press the SONG a button.
• This will start playback of the song data.
• Press the SONG a button again to stop playback.
5.
To change to another song, hold down the
FUNCTION button as you use the SONG
SELECT plus (+) and minus (–) keyboard
keys to select the song you want to hear.
• Pressing the plus (+) or minus (–) key scrolls through
song file names.
• You can use the value input keys (0 to 9) to enter a
specific two-digit song number.
Example: To select song 08, enter 0 and then 8.
6.
To exit the USB flash drive song playback
function, hold down the FUNCTION button as
you press the USB flash drive mode key.
Flashing Off
Delete start Delete complete
Simple Play Back of a Song on
a USB Flash Drive
AP450_e.book 32 ページ ２０１２年６月２０日 水曜日 午前１１時１１分