Filter
Top Products
E-12
Variation Button
Each tone button is assigned two tones: a “normal tone”
(whose name is above the tone button) and a “variation tone”
(whose name is below the tone button). Which tone is selected
when you press a tone button depends on the current status
of the indicator lamp above the VARIATION button, as shown
below.
• Press the VARIATION button to toggle its indicator lamp
on and off.
• Pressing the tone button of the currently selected tone
toggles it between the normal tone and the variation tone.
NOTE
• The tone buttons provide you with a selection of 16 tones
that you can assign to and play on the keyboard.
• The GRAND PIANO 1 tone was recorded with stereo
sampling.
• See “Selecting a Variation Tone” for information on
selecting the tones whose names are marked below
each tone button.
To select a tone
1
Press the POWER button to turn on the digital piano
power.
2
Press one of the tone buttons to select the tone you
want.
3
Use the VOLUME slider to adjust the volume.
• It is a good idea to set the volume to a relatively low
level at first.
• Moving the slider towards MIN decreases volume,
while moving it towards MAX increases volume.
4
Play something on the keyboard.
• Adjust volume to the level you want as you play.
5
After you are finished playing, press the POWER
button to turn off power.
NOTE
• The GRAND PIANO 1 tone is selected automatically
whenever you turn on the digital piano power.
Selecting a Variation Tone
The tone buttons that are marked as shown below are for
selecting variation tones.
1
Press the tone button for the tone you want to select.
2
Press the VARIATION button.
• This causes the indicator lamp above the button to
light, which indicates that the variation tone is
selected.
3
To switch back from variation tone to normal tone,
press the VARIATION button again to the indicator
lamp goes out.
430A-E-014A
BRIGHT
PIANO
HONKY-
TONK
GRAND
PIANO 2
ELEC
PIANO 2
VIBRAPHONE
HARPSI-
CHORD
PIPE
ORGAN 2
STRINGS 2
STRINGS 1
SYNTH-PAD
GRAND
PIANO 1
ELEC
PIANO 1
PIPE
ORGAN 1
VARIATION
button
CHOIR
RIDE ACO
BASS
ACOUSTIC
BASS
Variation Tones
Tone Buttons
Using Tones
The following procedures describe everything you need to
know about selecting and using tones.
Selecting a Tone
This digital piano has a selection of 16 built-in tones.
To select this type of tone:
The VARIATION button
lamp should be:
Normal tone Off
Variation tone On
Basic Operation