Filter
Top Products
Selecting and Playing a Tone
E-9
You can use the following procedure to assign one of
the 20 Various tones, 128 GM tones, or 2 Drum sets to
the VARIOUS/GM TONES button. After that you can
select the assigned tone by pressing the VARIOUS/
GM TONES button.
1.
In the Tone List on page A-1, find the tone
number of the Various tone, GM tone, and
Drum set you want to assign to the
VARIOUS/GM TONES button.
Example: 003 DANCE PIANO
2.
Press the VARIOUS/GM TONES button.
• This will cause the lamp above the button to light.
• To find out the tone that is currently assigned to the
VARIOUS/GM TONES button, hold down the
button. This will cause the number of its tone to
appear on the display. Releasing the button will
return to the song or rhythm number display.
Example: 001 MELLOW PIANO
3.
To change the tone assigned to the
VARIOUS/GM TONES button, hold down the
button as you use the /NO and /YES
buttons to scroll through the tone numbers on
the display. Display the number of the tone
you want to assign to the button.
• Holding down either button changes the value at
high speed.
NOTE
• See “Other Settings” on page E-25 for information about
another method you can use to assign a tone to the
VARIOUS/GM TONES button.
• The tone you assign to the VARIOUS/GM TONES
button is retained until you turn off the digital piano.
• If a drum set is assigned to the VARIOUS/GM TONES
button, keyboard keys sound drum sounds when you
press them while the lamp above the VARIOUS/GM
TONES button is lit. See page A-2 for information about
the drum sounds that are assigned to each of the
keyboard keys.
Use the following procedure to adjust the brilliance of a
tone.
1.
Press the BRILLIANCE button.
• This will cause the lamp above the button to light,
indicating that the brilliance effect is being applied.
This also will change the brilliance of the tone in
accordance with the initial setting.
2.
To change the brilliance setting, hold down
the BRILLIANCE button as you press the
/NO and /YES buttons.
3.
To cancel the brilliance effect, press the
BRILLIANCE button again so its lamp goes
out.
NOTE
•Pressing the /NO and /YES buttons at the same
time will return the displayed setting to its default.
• See “Other Settings” on page E-25 for information about
another method you can use to configure brilliance
settings.
Selecting a Various tone, GM
tone, and Drum set
Adjusting the Brilliance of a
Tone
To do this: Press this button:
Make the tone softer
Make the tone sharper
AP500_02_e.fm 9 ページ ２００６年１１月７日 火曜日 午後１２時１２分