Filter
Top Products
Assembling the Stand
E-41
3.
First secure the sides of the back panel with
the two
I
screws on the left and right.
• At location
4
, slip the
G
clip onto to the
I
screw
before installing the screw.
• With back panel
C
resting on top of the feet
5
of side
panels
A
and
B
, press the back panel against
crosspiece
D
as you install the
I
screws.
4.
Next, secure the bottom of the back panel
C
with the six
F
screws.
5.
Adjust the height adjustment screw
6
to
provide support so crosspiece
D
does not
bow downwards when the pedals are
pressed.
IMPORTANT!
• Pressing the pedals without adjusting height adjustment
screw
6
can result in damage to crosspiece
D
. Always
make sure you adjust height adjustment screw
6
before
operating the pedals.
6.
Mound the piano onto the stand.
• Use the
H
butterfly bolts to secure the piano to the
stand.
• After ensuring that the screws on the bottom of the
piano hook into the cut outs in the stand brackets
7
,
secure the piano with the
H
butterfly bolts.
• The butterfly bolts keep the piano from slipping off
the stand. Never use the piano without the butterfly
bolts installed.
5
I
I
4
G
C
F
A
B
(Back)
6
7
H
H
7
H
7
Back
Front
AP500_e.book 41 ページ ２００６年１０月１９日 木曜日 午後３時５４分