Filter
Top Products
Other Settings
E-29
■ MIDI
Pre-count OTHERS P.oF: Off
P.on: On
Turns the pre-count before playback of a Music
Library song on or off. When configuring the setting
of this parameter, use the procedure under “To
change the setting of one of the OTHERS button
parameters” on page E-26.
NOTE
• When playing a song from the user area or from
an SD memory card, the pre-count may not
sound, even though the pre-count setting is
turned on.
Auto Accompaniment
mode
MODE oFF : NORMAL
C.C. : CASIO CHORD
FnG : FINGERED
FUL : FULL RANGE
CHORD
Specifies the Auto Accompaniment mode.
Setting Parameter Name Settings Description
Send channel MIDI C.01 to C.16 Specifies one of the MIDI channels (1 through 16) as
the Send Channel, which is used for sending MIDI
messages to an external device. When configuring
the setting of this parameter, use the procedure
under “To change the setting of one of the MIDI
button parameters” on page E-26.
Accomp MIDI out MIDI o.oF:
Off
o.on: On
Use this parameter to specify whether or not MIDI
messages should be sent in accordance with the
digital piano’s Auto Accompaniment and recording
function playback. When configuring the setting of
this parameter, use the procedure under “To change
the setting of one of the MIDI button parameters” on
page E-26.
MIDI In Chord judge MIDI J.oF: Off
J.on: On
Specifies whether chord judge should be performed
on accompaniment range MIDI Note On messages
received from an external device. When configuring
the setting of this parameter, use the procedure
under “To change the setting of one of the MIDI
button parameters” on page E-26.
Local control OTHERS L.oF: Off
L.on: On
When Local Control is turned on, pressing the
keyboard’s keys plays the notes using the currently
selected built-in tone, and also sends the applicable
MIDI messages out the MIDI OUT port. Turning off
Local Control cuts off the digital piano’s sound
source, so no sound is produced by the digital piano
when keys are pressed. This capability comes in
handy when you want to turn off the digital piano’s
keyboard and play on an external sequencer or other
device.
When configuring the setting of this parameter, use
the procedure under “To change the setting of one of
the OTHERS button parameters” on page E-26.
Setting Parameter Name Settings Description
AP500_e.book 29 ページ ２００６年１０月１９日 木曜日 午後３時５４分