Casio CTK-591 Electronic Keyboard User Manual


 
E-45
3
Make any of the following settings if you want.
Tone number (page E-19)
If you are not confident about playing at a fast tempo,
try using a slower tempo setting (page E-35).
4
Press the START/STOP button to start real-time
recording to Track 2 along with playback from
Track 1.
5
Listening to the playback from Track 1, play what
you want to record to Track 2 on the keyboard.
6
Press the START/STOP button to end recording
when you are finished playing.
If you make a mistake while recording, stop the record
operation and begin over again from step 1.
NOTE
Track 2 is a melody-only track, so chords cannot be
recorded there. Because of this, the entire keyboard is
a melody keyboard, regardless of the MODE switch
setting.
To record to Track 2 without playing
back Track 1
1
Use the SONG MEMORY button to enter record
standby.
2
Press the TRACK 1 button to turn off playback of
Track 1.
3
Continue from step 1 under To record to Track 2
while playing back Track 1.
Note that the above procedure does not turn off
rhythm and Auto Accompaniment.
Track 2 Contents After Real-time
Recording
The following data is recorded to Track 2 during real-time
recording.
Tone number
Pedal operations
Deleting the Contents of a Specific
Track
Use the following procedure to delete all of the data currently
recorded in a specific track.
To delete all of the data in a specific
track
1
Use the SONG MEMORY button to enter record
standby, and then use [+] and [] to select the song
(0 or 1) whose track you want to delete.
2
Hold down the SONG MEMORY button until the
track delete screen appears on the display.
3
Use the TRACK 1 or TRACK 2 button to select the
track whose data you want to delete.
Example: To select Track 1
4
Press the [+] button.
This deletes the selected track and enters song
memory playback standby.
NOTE
The track delete screen is cleared from the display
automatically if you leave the keyboard with the track
delete message on the display for about five seconds
without doing anything.
Once you select a track in step 3, you cannot change to
a different track without quitting the track delete operation
and starting again.
You cannot select a track for deletion if that track does
not contain any data.
Pressing the SONG MEMORY button while the track
delete screen is on the display returns to record standby.
Re c . N .o
Tr .De .?l
Song Memory Function
704A-E-047A
Tr .Del .?
Flash
CTK591_e_41-45.p65 03.10.7, 4:27 PM45