Filter
Top Products
E-56
MIDI
Pedal depressed
Pedal released
★ When SUS is set
★ When SoS is set
= Keyboard depressed.
= Sustained notes
Pedal depressed
Pedal released
SOUND RANGE SHIFT (Default: On)
on: Shifts low range tones one octave lower and 020
GLOCKENSPIEL/095 PICCOLO one octave higher.
oFF: Plays low range tones and 020 GLOCKENSPIEL/095
PICCOLO at their normal levels.
1
Press the SETTING button until the SOUND RANGE
SHIFT screen appears.
2
Use the [+] and [–] or [0] and [1] buttons to change
the setting.
Example: To turn SOUND RANGE SHIFT off
Sh i f t
Sh i f t
MIDI OUT Terminal
NOTE ON
MIDI OUT Terminal
• Note number (tone)
• Velocity (volume)
NOTE OFF
• Note number (tone)
• Velocity (volume)
Release the key
Press the key
Messages
There is a wide variety of messages defined under the MIDI
standard, and this section details the particular messages that
can be sent and received by this keyboard. An asterisk is used
to mark messages that affect the entire keyboard. Messages
without an asterisk are those that affect only a particular
channel.
NOTE ON/OFF
This message sends data when a key is pressed (NOTE ON)
or released (NOTE OFF).
A NOTE ON/OFF message include a note number (to indicate
note whose key is being pressed or released) and velocity
(keyboard pressure as a value from 1 to 127). NOTE ON
velocity is always used to determine the relative volume of
the note. This keyboard does not receive NOTE OFF velocity
data.
Whenever you press or release a key on this keyboard, the
corresponding NOTE ON or NOTE OFF message is sent from
the MIDI OUT terminal.
NOTE
• The pitch of a note depends on the tone that is being
used, as shown in the Note Table on page A-1. Whenever
this keyboard receives a note number that is outside its
range for that tone, the same tone in the nearest
available octave is substituted.
704A-E-058A
SETTING
Number buttons
[+] / [–]
CTK591_e_46-58.p65 03.10.7, 4:27 PM56