Using a Memory Card
E-111
Error Messages
Display Message Cause Required Action
Format 1. The current memory card format is not compatible with this
Digital Keyboard.
1. Format the memory card on the Digital Keyboard (page
E-103).
2. The memory card capacity is greater than 32GB. 2. Use a memory card with a capacity of 32GB or less.
3. You are trying to use an SDXC card. 3. SDXC cards not supported. Use an SD or SDHC memory
card.
4. There is something wrong with the memory card. 4. Use a different memory card.
Card Full There is not enough room available on the memory card. Delete some of the files on the memory card to make room for
new data (page E-107), or use a different card.
Card R/W Memory card data is corrupted. Use a different memory card.
No Card 1. The memory card is not loaded correctly in the Digital
Keyboard’s card slot.
1. Correctly load the memory card into the card slot.
2. The memory card was removed while some operation was
in progress.
2. Do not remove the memory card while any operation is in
progress.
No Data You tried to save a Digital Keyboard user area (user rhythm,
user rhythm song, etc.) that does not contain any data to the
memory card.
Select a user area that contains data.
No File 1. There is no MUSICDAT folder (page E-105) on the
memory card.
1. Create a MUSICDAT folder on the memory card or format
the memory card on the Digital Keyboard (page E-103).
2. There is no loadable or playable data in the MUSICDAT
folder.
2. Move the file you want to load or play into the memory
card’s MUSICDAT folder.
Not SMF0/1 You are attempting to play back SMF Format 2 file. This Digital Keyboard supports playback of SMF Format 0 or
Format 1 only.
Protect The memory card is write-protected. Use the memory card’s write protect switch to enable writing.
Read Only A read-only file with the same name you are trying to use is
already stored on the memory card.
• Use a different name to save the new file.
• Remove the read-only attribute from the existing file and
overwrite it with the new file.
• Use a different memory card.
Size Over 1. The data on the memory card is too big to play. 1. This Digital Keyboard supports playback of song data files
with a maximum size of about 320KB.
2. The data you are trying to load is too large. 2. The following is the approximate maximum data sizes (per
data item) when loading data into Digital Keyboard
memory.
User rhythm: 32KB
Song sequencer song: 61KB
User preset: 8KB
A total of approximately 64KB of user presets (total of all
50 user presets) can be loaded.
Wrong Data 1. The memory card data is corrupted. Use a different memory card.
2. The memory card contains data that is not supported by
this Digital Keyboard.
Meas. Limit You tried to perform an operation during song sequencer
song editing or user music preset editing that would cause the
number of measures in the song or chord progression to
exceed 999.
Make sure your edits do not cause the number of measures
to exceed the 999-measure limit.
Memory Full 1. There is not enough memory capacity required for rhythm
editor operations.
1. Select the rhythm you want to use.
2. Remaining memory capacity became too low during music
preset editing.
2. Referring to “To clear user preset data” (page E-55), delete
user presets you no longer need in order to free up
memory.
3. There is not enough memory capacity required for song
sequencer operations.
3. Delete other tracks and/or songs to free up memory space.
File Name When renaming a file on a memory card, attempting to
specify a file name that is already used.
Use a different name.
B