Casio CTK-6200 Electronic Keyboard User Manual


 
Using the Song Sequencer
E-87
1.
Display the event editor screen of the track that
includes the events you want to delete.
See “To select a track for editing” (page E-85).
2.
While holding down the R-13 (FUNCTION)
button, press the C-13 (MENU) button to display
the event editor menu.
3.
Use the R-17 (t, y) button to move the 0 to
“Delete” and then press the R-16 (ENTER)
button.
This displays the “Delete” screen.
4.
Use the dial or R-14 (–, +) buttons to change the
setting in the thick brackets (%) to “All”, and
then press the R-16 (ENTER) button.
5.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to delete
or the R-14 (NO) button to cancel.
1.
Display the event editor screen of the track that
includes the events you want to delete.
See “To select a track for editing” (page E-85).
2.
If required, you can perform a song playback
operation at this time to check the range you
want to select for deletion.
See “To play back a song from the event editor screen
(Quick Play)” (page E-85).
3.
While holding down the R-13 (FUNCTION)
button, press the C-13 (MENU) button to display
the event editor menu.
4.
Use the R-17 (t, y) button to move the 0 to
“Delete” and then press the R-16 (ENTER)
button.
This displays the “Delete” screen.
5.
Use the dial or R-14 (–, +) buttons to change the
setting in the thick brackets (%) to “Locator”.
This displays a range specification screen like the one
shown below.
If you have already specified a range using the locator
screen (page E-74), that range will be displayed on the
range specification screen.
6.
Use the R-17 (u, i) button to move the
cursor, and then use the dial or R-14 (–, +)
buttons to change the value at the cursor
position.
The event located at the timing specified by the range
end point will not be deleted.
7.
After everything is the way you want, press the
R-16 (ENTER) button.
8.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to delete
or the R-14 (NO) button to cancel.
To delete all events in a track
To delete all events in a specific range of a
track
Range start point
Range end point