Filter
Top Products
— 3 —
MIDI Message Operation switch Setting Opeartion for setting
Note No. Keyboard
Octave shift switch Octave range
See the fi
g
ure below
Velocity Keyboard
Velocity switch Velocity value CONTROL + VELOCITY, XXX, ENTER
Pitch Bend Pitch bend switch Bend sense
Bend curve
BEND SENS, XXX, ENTER
BEND CURVE, X, ENTER
Modulation Modulation switch Modulation depth MOD.DEPTH, XXX, ENTER
OPERATION
Transmitting MIDI Messages
To transmit MIDI messages, set the Mode Switch to the MIDI OUT position.
Operation 1
The note number is transmitted when the corresponding key is pressed.
Use the Octave Shift Switch, and select the position appropriate to the octave range you want. GZ-5 can send
note numbers 17 to 108 but it has 32 keys only.
Velocity is also transmitted when a key is pressed. GZ-5 sends the velocity in accordance with the selected
position of the velocity switch.
Data of pitch bend and modulation is transmitted when the corresponding switch is operated.
The values of the velocity, the pitch bend and the modulation switches are automatically set up to the initial
value when turning on the power.
See the appendix for information about the initial value.
See the following table for instruction how to change the value.
Example of operation : CONTROL + VELOCITY, XXX, ENTER
Press CONTROL button and VELOCITY button at the same time.
Use the 10-key pads, enter a 3-digit number.
Press ENTER button.
Position of the octave switch and octave range
C1
C4=60
C2
C3
C4
C5
C6
C1 C2 C3 C4 C5 C6