Filter
Top Products
— 4 —
Operation 2
The MIDI messages listed below are transmitted when completing the operation shown in the following
table.
Example of operation : CONTROL + VELOCITY, XXX, ENTER
Press CONTROL button and VELOCITY button at the same time.
Use the 10-key pads, enter a 3-digit number.
Press ENTER button.
Notes: 1.See the appendix for information about a value to be entered, "XXX".
2. For details of MIDI message and operation, see GZ-5 operation manual.
MIDI Message Operation
Program change CONTROL + PROGRAM CHANGE, XXX, ENTER
Volum
e
CONTROL + VOLUME, XXX, ENTER
Pa
n
CONTROL + PAN, XXX, ENTER
Expression CONTROL + EXPRESSION, XXX, ENTER
Hold 1 CONTROL + HOLD 1, XXX, ENTER
Soft pedal CONTROL + SOFT PEDAL, XXX, ENTER
Effect depth CONTROL + EFFECT DEPTH, XXX, ENTER
Fine tun
e
CONTROL + FINE TUNE, XXX, ENTER
Coarse tun
e
CONTROL + COARSE TUNE, XXX ENTER
All notes of
f
CONTROL + MIDI CH.
Reset all controlle
r
MIDI CH. + BEND SENSE
General MIDI reset BEND CURVE + MOD. DEPTH
MIDI channel MIDI CH., XXX, ENTER
Control change