Filter
Top Products
Controlling the Keyboard Sounds
E-12
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
• The transpose setting range is –12 to +12 semitones.
1.
Press
4
.
2.
Use the
bo
(10-key) [–] and [+] keys to select the
transpose setting you want.
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
• The tuning setting range is –99 to +99 cents.
1.
Press
4
a number of times until “Tune”
appears on the display (page E-4).
2.
Use the
bo
(10-key) [–] and [+] keys to adjust the
tuning.
You can use the Digital Keyboard to sample a sound from a
microphone, and then play the sound with keyboard keys. For
example, you could sample the bark of your dog and then use
the sound in a melody. The sampling feature is a great way to
create new sounds that are highly creative.
Connect a microphone.
• Use of a commercially available microphone also is
supported.
• Turn off the microphone and the Digital Keyboard
before connecting them.
• It will take a few seconds before you can use the
microphone after you turn on the keyboard.
• Sampled sounds are recorded in monaural.
• You cannot sample sounds input from through the
AUDIO IN jack.
1.
Turn the volume levels of the Digital Keyboard
down.
2.
Turn on the microphone and then the Digital
Keyboard.
3.
Use
3
to adjust the volume level of
microphone input.
4.
Press
5
.
This enters record standby.
Changing the Pitch
(Transpose, Tuning)
Changing the Pitch in Semitone Steps
(Transpose)
Fine Tuning (Tuning)
Trans.
Tune
Sampling a Sound and Playing It
on the Keyboard
Connection
Sampling a Sound and Playing It
MIC IN jack
W
a i t i n
g
Flashes